Setup; Functional Overview; Front Panel; Display - Sharp DV-NC200X Operation Manual

Front Panel

D V- N C 200
OPERATE
PULL OPEN
20 19 18 17
1. Disc Tray
2. PLAY (DVD)
To begin disc playback.
3. STOP (DVD)
To stop playback.
4. DVD OUTPUT Indicator
The indicator is on when this VCR/DVD is in the DVD mode.
Make sure that this indicator is on before using the DVD player.
5. OUTPUT
To select the DVD mode or VCR mode.
6. VCR OUTPUT Indicator
The indicator is on when this VCR/DVD is in the VCR mode. Make
sure that this indicator is on before VCR operation.
7. OPEN/CLOSE (DVD)
To open or close the disc tray.
8. CHANNEL
To change TV channels.
To adjust the tracking manually during VCR playback.

9. Display

10. Remote Sensor
11. TIMER Indicator
The indicator is on when the VCR/DVD is in standby mode for a
Timer Recording or during a One Touch Recording.
Display
DVD Output Mode
1. Lights up when the A-B repeat function is on.
2. Lights up when the ALL repeat function is on.
3. Lights up when the inserted disc comes to a pause.
4. Lights up when playing back in slow mode (DVD or Video CD).
5. Lights up when the inserted disc is being played back.
6. Lights up when the repeat function is on.
7. Displays how long the current title or track has been played back.
When a chapter or track is switched, the number of a new title,
chapter or track is displayed.
8. Displays a type of the disc which is inserted on the tray.
• DVD : DVD
• CD : Audio CD, MP3, JPEG, Kodak Picture CD
• VCD : Video CD
9. Lights up when the progressive scan system is activated.
H9945AD_1.indd 6 H9945AD_1.indd 6

SETUP

F
UNCTIONAL
STOP/
REW FF EJECT PLAY REC
TIMER
16 15 14 13 12 11 10
O
VERVIEW
OPEN/CLOSE
OUTPUT
CH VCR DVD
(TRACKING)
9 8 7 6 5 4
12. REC (VCR)
Press once to start recording or repeatedly to start One Touch
Recording. The indicator is on during recording.
13. PLAY (VCR)
To begin tape playback.
14. STOP/EJECT (VCR)
To stop playback. To eject the tape in the stop mode.
15. FF (VCR)
To fast forward the tape.
16. REW (VCR)
To rewind the tape.
17. Cassette Compartment
18. AUDIO IN Jacks (AV2 / VCR only)
Connect Audio cable coming from the audio out jacks of a cam-
corder, another VCR, or an audio source here.
19. VIDEO IN Jack (AV2 / VCR only)
Connect a cable coming from the video out jack of a camcord-
er, another VCR or an audio-visual source (laser disc player, video
disc player, etc.) here.
20. OPERATE
To turn the VCR/DVD ON or OFF.
The indicator is on when this VCR/DVD is turned on.
VCR Output Mode
1 2 3 4
1. *Lights up when a tape is in the VCR/DVD.
2. Lights up during playback when the repeat function is on.
3. Lights up when the playback is in still or slow mode.
4. Lights up when the inserted cassette is being played back.
5. Works as a tape counter (hour, minute, second). Also displays a
channel number, tape speed, remaining time for OTR or current
time.
6. *Lights up when the Timer Recording or an OTR recording has
been set.
7. *Lights up during a recording. Flashes when a recording is paused.
* , and mark will disappear when you set VCR/DVD in DVD
mode. However, the function indicated by each mark is still working.
– 6 –
STOP PLAY
3 2 1
5 6 7
5/11/2005 6:46:55 PM 5/11/2005 6:46:55 PM
EN