Connection To An Audio System - Sharp DV-NC200X Operation Manual

Connection to an Audio System

AUDIO
Stereo system
Audio cable
(supplied)
VCR/DVD
(Analogue) AUDIO
OUT
Setting
Connection
DOLBY DIGITAL
Connecting to Stereo
DPCM
System.
* To complete these settings, refer to pages 29, 31.
Hint
• Playing back a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
Optical Cable (not supplied)
• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diameter of 15 cm or more
when storing them.
• Use a cable which is 3 m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.
H9945AD_1.indd 11 H9945AD_1.indd 11
Method 1
Analogue audio
L R
input jacks
L L
or
R R
SETUP > (QUICK) >
DTS MPEG
OFF DPCM
Dolby Digital decoder, DTS decoder, MPEG decoder,
MD deck or DAT deck
Audio Coaxial or
Optical Digital cable
(commercially
available)
DIGITAL AUDIO OUT
Setting
Connection
DOLBY DIGITAL
Connecting to a
Dolby Digital, DTS
decoder or MPEG
decoder for Dolby
Digital, DTS or MPEG
audio output.
Connecting to the
other equipment
(an MD deck or
DAT deck etc.) with-
out Dolby Digital
decoder.
* To complete these settings, refer to pages 29, 31.
Hint
• The DVD AUDIO OUT and DIGITAL AUDIO OUT jacks are only use-
ful in DVD mode.
• The audio source on a disc in a Dolby Digital 5.1 channel surround
format cannot be recorded as digital sound by an MD or DAT
deck.
• By hooking this VCR/DVD up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital 5.1 channel sur-
round sound as heard in the movie theatres.
• By hooking this VCR/DVD up to the DTS decoder, you can enjoy
5.1 channel surround system which reproduces the original sound
as truthfully as possible. 5.1 channel surround system is developed
by the Digital Theater System Inc.
• Playing back a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
– 11 –
Method 2
Digital audio
input jack
SETUP > (QUICK) >
DTS MPEG
BITSTREAM
DPCM OFF DPCM
5/11/2005 6:47:07 PM 5/11/2005 6:47:07 PM
EN