Connecting To Video Equipment - Sharp XV-Z17000 Operation Manual

Connecting to Video Equipment

Before connecting, be sure to unplug the power cord of the projector from the AC outlet and turn off the devices
to be connected. After making all connections, turn on the projector and then the other devices.
Connecting Equipment with HDMI Output Terminal to the HDMI Terminal on the Projector
For video connection, use a cable that conforms to HDMI standards. Using cables that do not conform to HDMI
standards may result in a malfunction.
To HDMI output terminal
Note
• Depending on specifi cations of equipment or the DVI
not work property. (The HDMI specifi cation does not support all connections to equipment that has digital
output terminal using a DVI
• HDMI (High-Defi nition Multimedia Interface) is a digital AV interface that can deliver a high-defi nition video
signal, multi-channel audio signal, and bi-directional control signal all in just one cable.
• Because it is compatible with the HDCP (High-bandwidth Digital Content Protection) system, the digital
video signal does not degrade when transmitted, and a high-quality image with a simple connection can
be enjoyed.
Connecting to Equipment with S-video Output Terminal
To S-video output terminal
Refer to "Samples of Cables for Connection" on page 19 for connecting other equipment.
-20
HDMI-compatible device
HDMI cable (type A)
(commercially available)
HDMI digital cable.)
DVD Player, etc.
S-video cable
(commercially available)
To HDMI1 or 2 terminal
HDMI digital cable, the signal transmission may
To S-VIDEO terminal