Specifi Cations - Sharp XV-Z17000 Operation Manual

Specifi cations
Model
Display devices
Resolution
Lens F number
Zoom
Focus
Input terminals HDMI
Computer/Component
(mini D-sub 15 pin)
Component (3RCA)
S-Video (mini DIN 4 pin)
Video (RCA)
Control and RS-232C (mini D-sub 9 pin)
communication
terminals
Projection lamp
Rated voltage
Rated frequency
Input current
Power consumption (Standby)
Operation temperature
Cabinet
Dimensions (main body only) [W × H × D]
Weight (approx.)
As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for
product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of produc-
tion units. There may be some deviations from these values in individual units.
This SHARP projector uses a DLP
with any high technology electronic equipment such as large screen TVs, video systems and video cameras, there
are certain acceptable tolerances that the equipment must conform to.
This unit has some inactive pixels within acceptable tolerances which may result in inactive dots on the picture
screen. This will not affect the picture quality or the life expectancy of the unit.
-76
®
chip. This very sophisticated panel contains 2,073,600 pixels (micromirrors). As
XV-Z17000
®
0.65" DLP Chip × 1
1080P (1920 × 1080)
F 2.5 – 2.7
Manual, ×1.15 (f = 21.0 – 24.2 mm)
Manual
× 2
× 1
× 1
× 1
× 1
× 1
250 W
AC 100 – 240V
50/60 Hz
3.7 A
353 W (7.6 W) with AC 100 V
339 W (8.3 W) with AC 240 V
41°F to 95°F (+5°C to +35°C)
Plastic
3 15 13
15 / " × 3 / " × 13
4 16
(400 × 100 × 335 mm)
12.8 lbs. (5.8 kg)
/ "
64