Projector (Rear View)
Using the Carrying Handle
When transporting the projector,
carry it by the carrying handle on
the side.
•
Always close the lens shutter to
prevent damage to the lens when
transporting the projector.
•
Do not lift or carry the projector
by the lens as this may damage
the lens.
Terminals
1
22
RS-232C terminal
Terminal for controlling the projector using a
computer.
2
COMPONENT terminals
Terminal for connecting video equipment with
component output terminal.
3
COMPUTER/COMPONENT
19, 21
input terminal
Terminal for computer RGB and YPbPr signals.
4
19, 20
HDMI1, 2 terminals
Terminal for connecting video equipment with
HDMI output terminal.
5
S-VIDEO input terminal
Terminal for connecting video equipment with
an S-video terminal.
Using the Kensington Lock
•
This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System.
Refer to the information that came with the system for instructions on how to use it to secure the projector.
1
2
19
19, 20
3
4
7
8
9
6
VIDEO input terminal
Terminal for connecting video equipment.
7
Carrying handle
For carrying the projector.
8
Remote control sensor
9
23
AC socket
Connect the supplied power cord.
10
Kensington Security Standard connector
11
Security bar
5
6
11
10
19
13
-11