Switching the Input Mode
Select the appropriate input mode for the connected
equipment.
Press HDMI1, 2, COMPONENT,
S-VIDEO, VIDEO or COMPUTER on the
remote control to select the input mode.
When you press INPUT on the projector or on
•
the remote control, the INPUT list appears.
Press P/R to switch the INPUT mode.
INPUT list
INPUT
HDMI1
HDMI2
COMPONENT
COMPUTER
S-VIDEO
VIDEO
Note
•
When you switch the INPUT mode, the image as
shown below will be displayed in the upper right
corner of the screen. (You can confi rm the selected
input mode and information on the input signal.)
HDMI1
YPbPr
1080P
•
When
is displayed, "3D" is set to "On".
•
If
is displayed, it means that a 3D image
signal that can be automatically detected is
being input.
Adjusting the Vertical and
Horizontal Position of the
Image
1
1
Press IMAGE SHIFT to enter the
image shift mode.
•
The image shift menu guide appears.
IMAGE SHIFT
END
Selectable buttons
ENDIMAGE SHIFT Exits the image shift mode.
ADJUSTP/R/O/Q Adjusts the image shift.
RESETRETURN Returns to a default setting.
H: 0
V: 0
ADJUST
RESET
Description
HDMI1, 2, COMPONENT,
S-VIDEO, VIDEO, COMPUTER
buttons
IMAGE SHIFT button
Adjustment buttons
(P/R/O/Q)
INPUT button
2
2
Press P/R/O/Q to adjust the
vertical and horizontal position
of the image.
H-Image Shift
\ button
Selectable items
H-Image Shift
Leftward
\ button
V-Image Shift
" button
Selectable items
V-Image Shift
Downward
" button
Note
•
To return to the default setting, press
RETURN when the image shift menu guide
is still on the screen.
•
The adjustable range of the image shift may
vary depending on:
-
the Resize mode
-
the Picture mode
-
the input signal resolution
-
the input 3D signal type
| button
Rightward
| button
' button
Upward
' button
-27