Displaying An Enlarged Portion Of An Image; Switching The Iris Setting; Hiding The Menu Temporarily (Menu Hide); Switching The Eco+Quiet Mode - Sharp XV-Z17000 Operation Manual

Displaying an Enlarged
Portion of an Image
Graphs, tables and other portions of projected images
can be enlarged. This is helpful when providing more
detailed explanations.
1 1
Press MAGNIFY on the remote
control.
• Enlarges the image.
• Pressing or
reduces the projected image.
Note
.
Press
×1 ×2 ×3 ×4 ×9
.
Press
• You can change the location of the en-
larged image using P, R, O and Q.
2 2
Press RETURN on the remote con-
trol to cancel the operation.
• To return to the default setting (×1), press
RETURN when the on-screen display of the
magnify mode is displayed.
Note
• The selectable magnifi cations differ de-
pending on the input signal.
• This function is not available for the 3D
mode.
• In the following cases, the image will return
to the normal size (×1).
- When switching the INPUT mode.
When RETURN has been pressed while
-
the on-screen display of the magnify
mode is displayed.
- When the input signal is changed.
- When the input signal resolution and re-
fresh rate (vertical frequency) change.
- When the Resize mode is changed.
- When the Picture mode is changed.
- When switching between 2D and 3D
mode.
MAGNIFY enlarges or
MAGNIFY buttons

IRIS 1, 2 buttons

Adjustment buttons
(P/R/O/Q)
RETURN button
MENU HIDE button
ECO+QUIET button

Switching the Iris Setting

This function controls the quantity of the projected
light and the contrast of the image.
Press IRIS 1 or 2.
• Each time the button is pressed while the display is
on, the mode changes in the following order:

IRIS 1 High Brightness

IRIS 2
On Off
Note
For details, see page 38.
•
Hiding the Menu Temporarily
(Menu Hide)
When the menu screen is displayed, you can tempo-
rarily hide the menu screen by pressing and holding
MENU HIDE on the remote control. This is useful
when, for example, checking the video adjustment
information.

Switching the Eco+Quiet Mode

Press ECO+QUIET to switch the
Eco+Quiet mode between on and off.
• When the Eco+Quiet Mode is set to "On", the sound of
the cooling fan will turn down, the power consumption
will decrease, and the lamp life will extend.
Note
Refer to "Eco+Quiet" on page 38 for details.
•
High Contrast
-29