Setting The Demo Mode; Selecting The Transmission Speed (Rs-232C); Fan Mode Setting; Returning To The Default Settings - Sharp XV-Z17000 Operation Manual

 Setting the Input Terminal Names (Input
Name)
Set the name of the input terminal (up to 14 alphanu-
merical characters).
1 1
Press P/R to select "Input Name"
and then press ENTER.
Picture SCR-ADJ
SIG-ADJ
Input name HDMI1
H D M I 1
Reset
Return
\ or | button
Selects a character column.
▼ or 、 button
Selects a character.
ENTER button
Sets the input terminal name.
2 2
Press P/R to select "Return" and
then press ENTER to return to the
previous screen.
• To return to the previous setting, select
"Reset" and then press ENTER.
Note
• When connecting the projector to a Sharp Video
Product with an HDMI cable using an input
mode of HDMI1 or HDMI2 and the linked func-
tion with HDMI CEC ("One Touch Play" or "Sys-
tem Standby") works normally, the name of the
connected Sharp Video Product is automatically
captured.
• When the input terminal name has been changed
by a user, the changed name is displayed.
• To return to the default name, select "Reset"
and press ENTER.

4 Setting the Demo Mode

Set the Demo Mode to "On" or "Off".
Selectable items
On This enables Demo Mode.
Off This disables Demo Mode.
PRJ-ADJ
Description
5 Selecting the Transmission
Speed (RS-232C)
Make sure that both the projector and computer are set
for the same baud rate.
Selectable items
9600bps Transmission speed is slow.
38400bps
115200bps Transmission speed is rapid.

6 Fan Mode Setting

This function changes the fan rotation speed.
Selectable items
Normal Suitable for normal environments.
High Select this when using the projector at
altitudes of approximately 4,900 feet
(1,500 meters) or more.
• When "Fan Mode" is set to "High", the fan rotation
speeds up, and the fan noise becomes louder.

7 Returning to the Default Settings

Use "All Reset" to initialize all the adjustments you have
made to the default settings.
Note
The following items cannot be initialized.
• "SIG-ADJ" menu — Resolution
• "SCR-ADJ" menu — Language
• "PRJ-ADJ" menu — Lamp Timer (Life)

8 Lamp Timer (Life)

You can confi rm the cumulative lamp usage time and the
remaining lamp life (percentage).
Lamp usage condition
"Life"
Operated exclusively with
"Eco+Quiet" set to "On"
Operated exclusively with
"Eco+Quiet" set to "Off"
Note
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
• The lamp life may vary depending on the us-
age condition.
Menu operation ⇒ Page 35
Description
Description
Remaining lamp life
100% 5%
Approx. 3,000 Approx. 150
hours hours
Approx. 2,000 Approx. 100
hours hours
-47