Using Connect Copy - Savin 2555 Copy Reference Manual

Connect Copy (Option)

Using Connect Copy

You can select Connect Copy mode from either of the two connected machines
by pressing the [Connect] key. The machine you use becomes the master unit,
and the other machine the sub-unit.
Limitation
Once Connect Copy is selected, you must carry out all operations on the mas-
ter unit.
Note
You can select whether the [Connect] key is displayed or not with the User
Tools. See "Connect Copy Master" in
A
4
Make sure that the machine is in Copy mode.
Note
If the User Codes are turned on, enter a user code programmed in the mas-
ter unit using the number keys (maximum 8 digits) then press the [#] key.
You do not need to enter the user code for the sub-unit.
Reference
P.90 "User Codes"
B
Press the [Connect] key on the machine that is to be the master unit.
When the key darkens, the two units are connected.
Master unit display
230
P.331 "Count Manager".