Savin 2555 Copy Reference Manual page 64

x Clearing Misfeeds
With Booklet Finisher
ZBQY190E
5
R CAUTION:
• The fusing section of this equipment might be very hot. You should be very
careful that you don't touch this section when removing the misfed paper.
Important
When clearing misfeeds, do not turn off the operation switch. If you do, your
copy settings are cleared.
To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
If paper misfeeds occur repeatedly, contact your service representative.
Note
More than one misfed area may be indicated. In this case, check every appli-
cable area. See the following charts: A, B, C, D, E1 – E5, P1, P2, U, R (R1 – R6)
You can find a sticker explaining how to remove misfed paper inside of the
front cover or inside of the finisher.
271