Savin 2555 Copy Reference Manual page 31

Connect Copy (Option)
The print settings of the document you select first are applied to the
merged documents.
If you select multiple files, you can confirm the file names or print order of
the files you selected in step C by scrolling through the list with the [T] and
[U] keys.
Press the [Select File] key to return to the "Document Server: Files" display.
Reference
For details, see the explanations of each function in this manual.
E
Press the [Connect] key.
When the key darkens, the two units are connected.
F
Enter the required number of prints using the number keys.
4
Note
Up to 999 can be entered.
To change the value entered, press the {Clear/Stop} key and enter a new
value.
If you print more than one set using the Sort function, you can check the
print result by printing out only the first set. See
G
Press the {Start} key.
Printing starts after the image data stored in the master unit has been trans-
ferred to the sub-unit.
Note
The printing may take some time after transferring the image data to the
sub-unit.
To stop originals from being printed, press the {Clear/Stop} key on the mas-
ter unit, then press the [Cancel] key following the instructions on the dis-
play.
The number of sheets and sets printed by the master unit and sub-unit may
be different.
The master unit and sub-unit may not finish printing at the same time.
238
P.218 "Sample Printing".