Savin 2555 Copy Reference Manual page 55

What to Do If Something Goes Wrong
Connect Copy
Because Connect Copy scans in all your originals into memory, if the number of
originals exceeds a certain limit, the machine will run out of memory.
Limitation
If memory is full on either the master unit or sub-unit, Interrupt Copy will not
be available.
Note
If you set "Memory Full Auto Scan Restart"of the User Tools to "Yes", the
memory overflow message will not be displayed, but make Connect Copy for
the scanned original automatically. Connect Copy continues scanning and
copying until finishing the job. Note that copy sets will be printed out sepa-
rately by scanning at this time.
Machine Status
The memory is full.
5
The machine asks you whether you want
to scan the remaining originals.
262
Action
Press the [Output] key to copy scanned
originals and clear the scanning data.
Press the [Clear] key to clear the scanning
data and not copy.
To continue copying, remove all copies
then press the [Resume] key. To stop copy-
ing, press the [Cancel] key.