1. Manuals
  2. Brands
  3. Savin Manuals
  4. All in One Printer
  5. 2335
  6. Manual

Savin 2335 Manual

Savin printer/fax/scanner/copier system settings
Hide thumbs Also See for 2335:
Table of Contents

Advertisement

Quick Links

See also: Operator's Manual
AdonisC2_ENcopy122F_FM.book Page 1 Thursday, February 15, 2001 3:23 PM
2535/2545/2535p/2545p
3502/4502/3502p/4502p
2235/2245/2335/2345
Series

System Settings

Read this manual carefully before you use this product and keep it handy for future
reference.
For safety, please follow the instructions in this manual.
Zdsh000j.eps

Advertisement

Table of Contents
loading

Related Manuals for Savin 2335

Summary of Contents for Savin 2335

  • Page 1: System Settings

    AdonisC2_ENcopy122F_FM.book Page 1 Thursday, February 15, 2001 3:23 PM 2535/2545/2535p/2545p 3502/4502/3502p/4502p 2235/2245/2335/2345 Series System Settings Zdsh000j.eps Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual.
  • Page 2 Two kinds of size notation are employed in this manual. With this machine refer to the inch version. For good copy quality, Savin recommends that you use genuine toner. Savin shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts in your office product.
  • Page 3 AdonisC2-sysEN122F_FM.book Page 1 Thursday, February 1, 2001 1:46 PM Note to users in the United States of America Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursu- ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 4: Copyrights And Trademarks

    AdonisC2-sysEN122F_FM.book Page i Thursday, February 1, 2001 1:46 PM Copyrights and Trademarks Trademarks ® Ethernet is a registered trademark of Xerox Corporation. ® ® PostScript and Acrobat rated. Apple Talk, Apple, Macintosh are registered trademarks of Apple Computer, In- corporated. Novel, and Netware are registered trademarks of Novel, Inc.
  • Page 5 AdonisC2-sysEN122F_FM.book Page ii Thursday, February 1, 2001 1:46 PM NetBSD Copyright Notice of NetBSD For all users to use this product: This product contains NetBSD operating system: For the most part, the software constituting the NetBSD operating system is not in the public domain;...
  • Page 6 AdonisC2-sysEN122F_FM.book Page iii Thursday, February 1, 2001 1:46 PM Authors Name List All product names mentioned herein are trademarks of their respective owners. The following notices are required to satisfy the license terms of the software that we have mentioned in this document: •...

  • Page 7: Energy Star Program

    AdonisC2-sysEN122F_FM.book Page iv Thursday, February 1, 2001 1:46 PM ENERGY STAR Program The ENERGY STAR Guidelines intend to establish an international energy-saving system for developing and introducing energy-efficient office equipment to deal with environmental is- sues, such as global warming. When a product meets the ENERGY STAR Guidelines for energy efficiency, the Partner shall place the ENERGY STAR logo onto the machine model.
  • Page 8 AdonisC2-sysEN122F_FM.book Page v Thursday, February 1, 2001 1:46 PM ❖ ❖ ❖ ❖ Specification Low Power Power consumption mode Default interval Recovery time Auto Off Power consumption mode Default interval Recovery Time Duplex Priority Recycled Paper In accordance with the ENERGY STAR Program, we recommend use of recycled paper which is environment friendly.Please contact your sales representative for recommended paper.

  • Page 9: How To Read This Manual

    AdonisC2-sysEN122F_FM.book Page vi Thursday, February 1, 2001 1:46 PM How to Read this Manual Symbols In this manual, the following symbols are used: R WARNING: This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the in- structions under this symbol.

  • Page 10: Table Of Contents

    AdonisC2-sysEN122F_FM.book Page vii Thursday, February 1, 2001 1:46 PM TABLE OF CONTENTS Manuals for this Machine... 1 Machine Types... 2 Additional Functions Provided by Internal Options... 3 Copy Mode... 3 Facsimile Mode (Option) ... 3 Printer Mode (Option)... 3 Scanner Mode (Option)... 3 1.
  • Page 11 AdonisC2-sysEN122F_FM.book Page viii Thursday, February 1, 2001 1:46 PM 3. User Tools (System Settings) Accessing the User Tools (System Settings) ... 29 Exiting from the User Tools... 30 User Tools Menu (System Settings) ... 32 Settings You Can Change with the User Tools ... 34 General Features ...

  • Page 12: Manuals For This Machine

    AdonisC2-sysEN122F_FM.book Page 1 Thursday, February 1, 2001 1:46 PM Manuals for this Machine This is a multi-functional machine combining copying, facsimile, Printer and Scanner functions. This manual describes procedures common to these func- tions. Each function's reference describes the operational procedures separately for the copying, facsimile, Printer and Scanner functions.

  • Page 13: Machine Types

    AdonisC2-sysEN122F_FM.book Page 2 Thursday, February 1, 2001 1:46 PM Machine Types This machine comes in two models which vary in copy speed. To make sure which model you have, see the inside front cover. Copy speed Type 1 Type 2 35 copies/minute (A4K, 8 "...

  • Page 14: Additional Functions Provided By Internal Options

    AdonisC2-sysEN122F_FM.book Page 3 Thursday, February 1, 2001 1:46 PM Additional Functions Provided by Internal Options You can expand the capabilities of this machine to include fax functions. When you want to add a function, contact your sales or service represen- tative.
  • Page 15 AdonisC2-sysEN122F_FM.book Page 4 Thursday, February 1, 2001 1:46 PM...

  • Page 16: Combined Function Operations

    Chapter1 Page 5 Friday, February 2, 2001 4:55 PM 1. Combined Function Control Panel { { { { User Tools/Counter} } } } key • User Tools Press to change the default settings and conditions to meet your require- ments. •...
  • Page 17 AdonisC2-sysEN122F_FM.book Page 6 Thursday, February 1, 2001 1:46 PM Combined Function Operations Function Status indicator These show the status of the above func- tions: • Yellow: the function is selected. • Green: the function is active. • Red: the function has been interrupt-...

  • Page 18: Changing Modes

    AdonisC2-sysEN122F_FM.book Page 7 Thursday, February 1, 2001 1:46 PM Changing Modes You can use this machine not only as a copier, but optionally as a fax, printer and scanner machine as well. Press the {Copy}, {Document Server}, {Facsimile}, or {Printer}, {Scanner} key to use each function. Limitation ❒...

  • Page 19: Copy Mode

    AdonisC2-sysEN122F_FM.book Page 8 Thursday, February 1, 2001 1:46 PM Combined Function Operations Copy Mode You can make basic copies, and en- large/reduce, combine, or use vari- ous other copy functions to make copies. You can also add options to further increase the number of func- tions.
  • Page 20 AdonisC2-sysEN122F_FM.book Page 9 Thursday, February 1, 2001 1:46 PM Press the { { { { Interrupt} } } } key again. The machine resumes the printing job of the received fax document. Resuming the interrupted copying job A Reset the previous original. B Press the { { { { Start} } } } key.

  • Page 21: Document Server Mode

    AdonisC2-sysEN122F_FM.book Page 10 Thursday, February 1, 2001 1:46 PM Combined Function Operations Document Server Mode You can store files in the document server. Note ❒ If you want to re-send fax docu- ments, go back to the Facsimile display. ❒ For details about this function and operation refer to the Copy Refer- ence.

  • Page 22: Interrupt The Operating Function And Start Storing

    AdonisC2-sysEN122F_FM.book Page 11 Thursday, February 1, 2001 1:46 PM Press the { { { { Facsimile} } } } key. The facsimile display appears on the panel display. Press the [Store File] key. Press [Store&Transmit] or [Store Only], and then press the [OK] key. If you select [Store&Transmit] and then input dial numbers or if you select [Store Only], go to step F F F F .

  • Page 23: Facsimile Mode

    AdonisC2-sysEN122F_FM.book Page 12 Thursday, February 1, 2001 1:46 PM Combined Function Operations Facsimile Mode Changing to Facsimile Mode You can always use the machine as a facsimile when you are not copying. Press the { { { { Facsimile} } } } key. The facsimile display appears on the panel display.

  • Page 24: Sending A Fax

    AdonisC2-sysEN122F_FM.book Page 13 Thursday, February 1, 2001 1:46 PM Sending a Fax Sending a fax while printing a received Scanning originals for memory transmission The machine can scan your originals for memory transmission even while printing a received fax. Complete the usual operations for sending a fax, then press the { { { { Start} } } } key.

  • Page 25: Printer Mode

    AdonisC2-sysEN122F_FM.book Page 14 Thursday, February 1, 2001 1:46 PM Combined Function Operations Printer Mode Changing to Printer Mode Whenever you print from applica- tions, you do not have to switch to printer mode. However, if you wish to cancel a print job, you need to switch to printer mode.

  • Page 26: Scanner Mode

    AdonisC2-sysEN122F_FM.book Page 15 Thursday, February 1, 2001 1:46 PM Scanner Mode Changing to Scanner Mode This scanner unit has two scanner functions: “Network TWAIN Scan- ner” and “Network Delivery Scan- ner”. Reference To configure the function priority, see the “Scanner Reference”. Limitation ❒...

  • Page 27: Interrupting Scanning

    AdonisC2-sysEN122F_FM.book Page 16 Thursday, February 1, 2001 1:46 PM Combined Function Operations Interrupting scanning If you want to scan while copying or faxing, follow the procedure below. Scanning while copying Usually, you cannot use this machine as a scanner until it finishes copying. Preparation Select Function Reset Timer to set “Instant”.

  • Page 28: Multi-Access

    AdonisC2-sysEN122F_FM.book Page 17 Thursday, February 1, 2001 1:46 PM Multi-Access You can carry out another job using a different function while the current job is being performed. This allows you to handle your jobs efficiently regardless of how the machine is being used.
  • Page 29 AdonisC2-sysEN122F_FM.book Page 18 Thursday, February 1, 2001 1:46 PM Combined Function Operations Mode after you select Mode before you select Operations for Copying Stapling Sort Operations for Copying Copying Transmission Operation/ Manual Reception Operation Scanning an original for Memory Transmission Memory Transmission Immediate Transmission ×...
  • Page 30 AdonisC2-sysEN122F_FM.book Page 19 Thursday, February 1, 2001 1:46 PM Mode after you select Mode before you select ❍ ❍ Printing from Document Server ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ Sending a Facsimile from Document Server Simultaneous operations are only available after the preceding job documents are all scanned and the [Next Job] key appears.
  • Page 31 AdonisC2-sysEN122F_FM.book Page 20 Thursday, February 1, 2001 1:46 PM Combined Function Operations...

  • Page 32: Configuring The Network

    AdonisC2-sysEN122F_FM.book Page 21 Thursday, February 1, 2001 1:46 PM 2. Configuring the Network Configuring the Network Mode Network Setting Distribute received fax IP Address, Subnet Mask, Gateway Address, Delivery Server IP Address,Fax RX File Transmission, Effective Protocol (TCP/IP) documents Scanner (Network Twain IP Address, Subnet Mask, Gateway Address, Effective Protocol (TCP/IP) Scanner)

  • Page 33: Configuring The Network With The Operation Panel

    AdonisC2-sysEN122F_FM.book Page 22 Thursday, February 1, 2001 1:46 PM Configuring the Network Configuring the Network with the Operation Panel This section describes the basic procedures. Please set the settings appropriate for the network you are using. Important ❒ These settings should be set by your systems administrator or after consulting with your systems administrator.
  • Page 34 AdonisC2-sysEN122F_FM.book Page 23 Thursday, February 1, 2001 1:46 PM Press { { { { System Settings} } } } . Press [Interface Settings]. The following screen appears on the panel display. Make sure that the [Network] key is pressed. The following screen appears on the panel display. Press [Effective Protocol].
  • Page 35 AdonisC2-sysEN122F_FM.book Page 24 Thursday, February 1, 2001 1:46 PM Configuring the Network A Make sure that the [Effective Protocol] key is pressed. B Select [Invalid] or [Effective] for each protocol. C Press [OK]. The following operation will be different, depending on each protocols. If you use TCP/IP, you should assign an IP address.
  • Page 36 AdonisC2-sysEN122F_FM.book Page 25 Thursday, February 1, 2001 1:46 PM Note ❒ Press [← ← ← ← ] and [→ → → → ] Keys to move to the next entry field. ❒ If you enter the wrong IP address, press [Clear] and re-enter the IP ad- dress.
  • Page 37 AdonisC2-sysEN122F_FM.book Page 26 Thursday, February 1, 2001 1:46 PM Configuring the Network Press [T T T T Next], and then press [NW Frame Type] if you use NetWare. You can select the following frame types: • Auto select (Default) • Ethernet II •...
  • Page 38 AdonisC2-sysEN122F_FM.book Page 27 Thursday, February 1, 2001 1:46 PM C Select the Frame Type, and then press [OK]. Press [Exit]. Returns to the [User Tools/Counter] display. Press [List/Test Print] to print out the settings. A Press [Printer Features]. B Press [List/Test Print]. C Press [Config.
  • Page 39 AdonisC2-sysEN122F_FM.book Page 28 Thursday, February 1, 2001 1:46 PM Configuring the Network...

  • Page 40: User Tools (System Settings)

    AdonisC2-sysEN122F_FM.book Page 29 Thursday, February 1, 2001 1:46 PM 3. User Tools (System Settings) Accessing the User Tools (System Settings) This section is for the key operators in charge of this machine. You can change or set the machine's default settings. Preparation After using the User Tools, be sure to exit from the User Tools.

  • Page 41: Exiting From The User Tools

    AdonisC2-sysEN122F_FM.book Page 30 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) Change the settings by following the instructions on the display panel. Then press the [OK] key. Note ❒ [OK]: Press to set the new settings and return to the previous menu. ❒...
  • Page 42 AdonisC2-sysEN122F_FM.book Page 31 Thursday, February 1, 2001 1:46 PM Accessing the User Tools (System Settings)

  • Page 43: User Tools Menu (System Settings)

    AdonisC2-sysEN122F_FM.book Page 32 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) User Tools Menu (System Settings)
  • Page 44 AdonisC2-sysEN122F_FM.book Page 33 Thursday, February 1, 2001 1:46 PM User Tools Menu (System Settings)

  • Page 45: Settings You Can Change With The User Tools

    AdonisC2-sysEN122F_FM.book Page 34 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) Settings You Can Change with the User Tools Reference For how to access the User Tools, ⇒ P.29 “Accessing the User Tools (System Set- tings)”. General Features ❖...
  • Page 46 AdonisC2-sysEN122F_FM.book Page 35 Thursday, February 1, 2001 1:46 PM • "Facsimile" Print priority is given to the fax function. • "Printer" Print priority is given to the printer function. • "Interleave" Prints jobs in the order in which they are initiated regardless of mode/ function.
  • Page 47 AdonisC2-sysEN122F_FM.book Page 36 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) ❖ ❖ ❖ ❖ Output: Copier You can specify a tray to which documents are delivered. External tray 1000-sheet finisher Finisher shift tray 1 Finisher shift tray 2 •...

  • Page 48: General Features

    AdonisC2-sysEN122F_FM.book Page 37 Thursday, February 1, 2001 1:46 PM ❖ ❖ ❖ ❖ Output: Facsimile You can specify a trays to which documents are delivered. • Internal tray 1 • Internal tray 2 • External tray • Finisher shift tray •...

  • Page 49: Paper Size Settings 1 / 3

    AdonisC2-sysEN122F_FM.book Page 38 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) Output tray settings Limitation ❒ You cannot interrupt a job when 1000–sheet Finisher is stapling jobs using pa- per larger than 8 "×14". However, jobs received by fax will be printed and delivered to Internal tray 1.

  • Page 50: Paper Size Settings

    AdonisC2-sysEN122F_FM.book Page 39 Thursday, February 1, 2001 1:46 PM Note ❒ The tray fence for the optional large capacity tray (LCT) is fixed. If you need to change the paper size, contact your service representative. ❒ If the paper size set for the dial in paper tray 1 and 2 is different to the pa- per size for this setting, the paper size of the dial has priority.

  • Page 51: Paper Size Settings

    AdonisC2-sysEN122F_FM.book Page 40 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) Paper Size Settings ❖ ❖ ❖ ❖ Paper Type (LCT) Sets the display so you can see what type of paper is loaded in the large ca- pacity tray.

  • Page 52: Timer Setting

    AdonisC2-sysEN122F_FM.book Page 41 Thursday, February 1, 2001 1:46 PM Timer Setting When entering Set Time mode, if a key operator code has already been set, you must enter the code (up to 8 digits). ⇒ P.49 “User Code”. ❖ ❖ ❖ ❖ Auto Off Timer The machine turns off automatically to conserve energy after a specified amount of time has past after a job.
  • Page 53 AdonisC2-sysEN122F_FM.book Page 42 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) Note ❒ If No is selected, the machine will not automatically switch the user code entry screen and you will not be able to limit who uses the machine. ❒...

  • Page 54: Interface Settings/Network

    AdonisC2-sysEN122F_FM.book Page 43 Thursday, February 1, 2001 1:46 PM Interface Settings/Network ❖ ❖ ❖ ❖ IP Address Before using this machine with the network environment you must configure the IP address. Note ❒ Default: 011.022.033.044 ❒ Do not use IP address that has been used for another machine. To get the addresses, contact your network administrator.
  • Page 55 AdonisC2-sysEN122F_FM.book Page 44 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) ❒ If you set access control as192.168.15.16, clients address might be assign as follows: Address for access mask Client Address 000.000.000.000 255.000.000.000 255.255.000.000 255.255.255.000 255.255.255.255 ❖ ❖ ❖ ❖ Network Boot Select how to set IP address from client.

  • Page 56: Interface Settings/Parallel Interface

    AdonisC2-sysEN122F_FM.book Page 45 Thursday, February 1, 2001 1:46 PM Interface Settings/Parallel Interface ❖ ❖ ❖ ❖ Parallel Timing Specifies the timing setting for the parallel interface. Under normal circum- stances, you will not need to change this setting. Note ❒ Default: ACK outside ❖...

  • Page 57: File Transfer

    AdonisC2-sysEN122F_FM.book Page 46 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) File Transfer Be sure to make these settings if you are using ScanRouter V2 Lite/Professional. Note ❒ The optional ScanRouter V2 Professional is required for distributing received fax documents.

  • Page 58: Key Operator Tools

    AdonisC2-sysEN122F_FM.book Page 47 Thursday, February 1, 2001 1:46 PM ❖ ❖ ❖ ❖ Recall Interval Time Specifies the interval the machine waits before resending data or a document, if a data could not be sent to the ScanRouter V2 Professional. Note ❒...
  • Page 59 AdonisC2-sysEN122F_FM.book Page 48 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) ❖ ❖ ❖ ❖ Key Operator Code This specifies whether or not to use passwords (max. 8 digits) to control use of the “Timer Setting” or “Key Operator Tools” settings for the access codes. Note ❒...
  • Page 60 AdonisC2-sysEN122F_FM.book Page 49 Thursday, February 1, 2001 1:46 PM ❖ ❖ ❖ ❖ Display/Print Counter Allows you to view and print the various counters. • Display/Print Counter Displays counters for each functions ( Total, Copier, Facsimile, Printer ). • Print Counter List If you want to print Counter List, press [Print Counter List], and then press start.
  • Page 61 AdonisC2-sysEN122F_FM.book Page 50 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) ❖ ❖ ❖ ❖ Document Server Limits the users who can use the Document Server function and manages the use of each user code. ❖ ❖ ❖ ❖ Facsimile Limits the users who can use the Fax function and manages the use of each user code.
  • Page 62 AdonisC2-sysEN122F_FM.book Page 51 Thursday, February 1, 2001 1:46 PM Press [New Program] key. Press the key for the classification you want to use from “Title Select”. Note ❒ The keys you can select are as follows. • [Freq.]… Added to the pages that is displayed first. •...
  • Page 63 AdonisC2-sysEN122F_FM.book Page 52 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) Select the functions to be used with the user code from “Available Func- tions”. Note ❒ The functions that can selected are as follows. • [Copier], [Facsimile TX], [Printer], [Document Server], [Scanner] ❒...
  • Page 64 AdonisC2-sysEN122F_FM.book Page 53 Thursday, February 1, 2001 1:46 PM Press the [OK] key. Press the [Exit] key. The display returns to the initial settings screen. Changing the User Code Press the{ { { { User Tools/ Counter} } } } key. Press the [System Settings] key.
  • Page 65 AdonisC2-sysEN122F_FM.book Page 54 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) Select the user code you want to change. Enter the new information for the item that you want to change. Press the [OK] key. Press the [Exit] key. The display returns to the initial settings screen.
  • Page 66 AdonisC2-sysEN122F_FM.book Page 55 Thursday, February 1, 2001 1:46 PM Clearing the User Code To clear a user code Press the { { { { User Tools/ Counter} } } } key. Press the [System Settings] key. Press the [Key Operator Tools] key. Press the [Program/Change/Delete User Code] key.
  • Page 67 AdonisC2-sysEN122F_FM.book Page 56 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) Press the [OK] key. Press “Yes” in the confirmation screen. Note ❒ If you don't want to quit deleting, press [No]. Press the [Exit] key. The display returns to the initial settings screen. To delete all user codes Using “Print Counter”, you can check the user codes for each print job for the Copy/Document Server function, Printer function, and Facsimile function.
  • Page 68 AdonisC2-sysEN122F_FM.book Page 57 Thursday, February 1, 2001 1:46 PM Press the [System Settings] key. Press the [Key Operator Tools] key. Press the [Program/Change/Delete User Code] key. Press the [Delete] key. Press the [Delete All] key. Press [Yes] in the confirmation screen. Note ❒...
  • Page 69 AdonisC2-sysEN122F_FM.book Page 58 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) Press the [Exit] key. The display returns to the initial settings screen. To display counter for each user code Using “Print Counter”, you can check the user codes for each print job for the Copy/Document Server function, Printer function, and Facsimile function.
  • Page 70 AdonisC2-sysEN122F_FM.book Page 59 Thursday, February 1, 2001 1:46 PM Printing the Counter Printing the Number of Prints (Counter) for Each User Code You can print out how many prints you used for Copier/Document Server, Printer, and Fax. Press the { { { { User Tools/Counter} } } } key. Press the [System Settings] key.
  • Page 71 AdonisC2-sysEN122F_FM.book Page 60 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) Press either [Print Counter] or [Transmission Counter]. Note ❒ You can select both [Print Counter] and [Transmission Counter] at the same time. Press [Print]. Printing the Number of Prints (Counter) for All User Code Press the { { { { User Tools/Counter} } } } key.
  • Page 72 AdonisC2-sysEN122F_FM.book Page 61 Thursday, February 1, 2001 1:46 PM Press either [Print Counter] or [Transmission Counter]. Note ❒ You can select both [Print Counter] and [Transmission Counter] at the same time. Press { { { { Print} } } } . Clearing the Counter Clearing the Number of Print (Counter) for Each User Codes Press the [User Tools/Counter] key.
  • Page 73 AdonisC2-sysEN122F_FM.book Page 62 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) Select User Code from the left side of display. Note ❒ Press [All on The Page] if you want to select all user codes on the page. Press [Clear] for Per User Code.
  • Page 74 AdonisC2-sysEN122F_FM.book Page 63 Thursday, February 1, 2001 1:46 PM Press [OK]. The user code counter will be clear. Note ❒ If you want to cancel the operation, press [Cancel]. Clearing the Number of Prints (Counter) for All User Code Press the { { { { User Tools/Counter} } } } key. Press the [System Settings] key.
  • Page 75 AdonisC2-sysEN122F_FM.book Page 64 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) Press either [Print Counter] or [Transmission Counter]. Note ❒ You can select both [Print Counter] and [Transmission Counter] at the same time. Press [OK]. All user code counters will be clear. Note ❒...

  • Page 76: Key Operator Tools 2 / 2

    AdonisC2-sysEN122F_FM.book Page 65 Thursday, February 1, 2001 1:46 PM Key Operator Tools ❖ ❖ ❖ ❖ Auto Delete File You can select whether the files on the document server will be deleted after a specified amount of time or not. Note ❒...

  • Page 77: Entering Text

    AdonisC2-sysEN122F_FM.book Page 66 Thursday, February 1, 2001 1:46 PM User Tools (System Settings) Entering Text This section describes how to enter characters. When you enter a character, it is shown at the position of the cursor. If there is a character at the cursor position, the entered character is shown before the character.

  • Page 78: How To Enter Text

    AdonisC2-sysEN122F_FM.book Page 67 Thursday, February 1, 2001 1:46 PM How to Enter Text Entering letters Press the [Shift] to switch between uppercase and lowercase. Press letter you want to enter. Deleting characters Press [Backspace] or [Delete All] to delete characters. Entering Text...

  • Page 79: Index

    AdonisC2-sysEN122F_FM.book Page 68 Thursday, February 1, 2001 1:46 PM INDEX Check Modes key , 5 Clear Modes key , 5 Clear/Stop key , 5 Combined Function Operations , 5 Configuring the Network , 21 Control Panel , 5 Copy Mode , 1 , 8 Display panel , 5 Document Server Mode , 10 Energy Saver key , 5...

This manual is also suitable for:

23452535p3502p4502p22352535 ... Show all

Table of Contents