Connect Copy - Savin Pro 1106EX Operating Instructions Manual

Troubleshooting
Hide thumbs Also See for Pro 1106EX:
Table of Contents

Advertisement

Troubleshooting When Using the Copy Function
Message
Authentication
has failed.
Authentication
has failed.
The selected
2
file(s) contained
file(s) without
access privileg-
es. Only file(s)
with access priv-
ileges will be
deleted.
Please wait.
It will be neces-
sary to start
over and reload
the tab stock to
the trays.

❖ Connect Copy

Message
Cannot connect to
the sub-machine.
Check the status of
the sub-machine.
Cannot print from
the sub-machine.
Check the status of
the sub-machine.
22
Cause
The entered login user
name or login password
is not correct.
The machine cannot per-
form authentication.
You have tried to delete
files without the authori-
ty to do so.
The destination list is being
updated from the network
using SmartDeviceMoni-
tor for Admin. Depending
on the number of destina-
tions to be updated, there
may be some delay before
you can resume operation.
Operations are not possi-
ble while this message is
displayed.
A misfeed occurred when
unneeded tab stock was
ejected.
Cause
• The L indicator is lit.
• The hard disk of the
sub-machine is mal-
functioning.
A paper misfeed has oc-
curred on the sub-ma-
chine, or toner or other
supplies need to be re-
plenished.
Solution
Inquire the user administrator for the
correct login user name and login pass-
word.
Contact the administrator.
Files can be deleted by the person who
created the file. To delete a file which
you are not authorized to delete, con-
tact the person who created the file.
Wait until the message disappears. Do
not switch off the power while this
message is displayed.
Remove the jammed sheet.
If cycle printing is specified for tab
stock sheets, both needed and unneed-
ed tab stock is ejected when copying re-
starts. Reload the tab stock trays before
the new print cycle begins.
After resetting the tab stock pages,
press [Exit]. To resume printing, press
the {Start} key.
Solution
Press [Exit] on the main machine and
follow the instructions on the display.
Follow the instructions displayed. For
details, see p.87 "Adding Toner", p.93
"Removing Jammed Paper", p.106 "Re-
moving Jammed Staples".
If the sub-machine's display indicates
that a cover is open, follow the instruc-
tions displayed.

Advertisement

Table of Contents
loading

Table of Contents