GE JKP18 Owner's Manual page 8

Special features of your oven control
Tonesat the End of a Timed Cycle
At the end of a t/knedcycle,3 short beeps will
sound followed by one beep every 6 seconds until
the CLEAR/OFFpad is pressed Thiscontinuous
6 secondbeep may be canceled
To cancel tile 6 second beep:
[] Press tile BAKE and BROIL HI/LO
pads (on double o'_en models use
tile upper oven controls) at tile same
time fin" 3 seconds tmtil tile display
shows SF
[] Press tile KITCHEN TIMER ON/OFF
pad. Tile display shows CON BEEP
(continuous beep). Press the
KITCHEN TIMER ON/OFF pad
again. Tile display sl/o_:_ BEEP.
(This cancels tile one beep e\'ex T
6 seconds.)
[] Press tile START pad.
NOTE: Ondouble ovenmodels this cancels the
endof cycle tone for both ovens.
Fahrenheit or Celsius Temperature Selection
Yourovencontrol is set to use the Fahrenheit
temperature, s elections but youmay change this
to use the Celsiusselections.
[] Press tile BAKE and
BROIL HI/LO
pads (on
double oven models use
the tipper oxen controls) at the same
time fin" 3 seconds until the displa)
shows
SE
[] Press tile BROIL HI/LO pad. Tile
displa_ _dll show F (Fahrenheit).
[] Press tile BROIL
HI/LO
pad again.
Tile display will show C (Celsius).
[] Press tile START pad.
NOTE." O ndoubleovenmodels thenewsetting
will be displayedforbothovens.
i @ i ¸¸ i
Cook and Hold
Your new control has a cook and hold feature treat
keepscooked foods warm for up to 3 hours after
the cooking function is finishecL
To activate this featm'e, follow the steps
()n double o',em_ models both o',em_s
f)}]](_r
the same step 1. Thel_ proceed
with steps 2 throl_g]l 3, I_sh_g the pads fitr
the lit)per or lower ore]/.
[] Press the BAKE m_d BROIL HI/tO
pads (o_ dold_Ie o',e_ models use
the upper o_ e_ commo]s) at the sm_e
time fi)r 3 secom_ds m_ti] the display
[]
Press tile COOKING TIME pad. The
[]
Press the COOKING TIME pad agaim_
to activate the {eatm'e. The (lisp]a}
will show Hid ON.
Press the START pad to activate
the cook m_d hold [eatm'e m_d
leave the co_tro] set im_this special
feam]'es mode.
!i ii iii i ii
8
Us&g Convection Conversion
By using the ConvectionConversionfeature you
can automatically convert the oven temperature
from regular baking to ConvectionBake
temperatures.
To COlivert tile oxell tei//pei'at/li'e [i)r
comection baking, follow tile steps below.
[] Press and hold tile CONVECTION
BAKEpad fin" 4 to 5 seconds.
CONConBake
xdll show in tile
display.
[] Using tile nmnber pads, enter
tile temperature recommended
in the recipe,
[]
Press tile START pad.
Tile display sl/o_:_ tile converted
(reduced) temperatm'e. For
example, if you entered a recipe
temperature of 350°E, tile display
will show 325°F.when it is converted.
[] Press tile CLEAR/OFFpad when
baking is finished.
NOTE."Conversionmust be set each dyneyou
want to use it It is not held in memory