Recording An Outgoing Message (Ogm) On The External Tad - Brother MFC-J4510DW Basic User's Manual

e
Lift the scanner cover to release the
lock. Gently push the scanner cover
support down and close the scanner
cover using both hands.
f
Set your external TAD to four rings or
less. (The machine's Ring Delay setting
does not apply.)
g
Record the outgoing message on your
external TAD.
h
Set the TAD to answer calls.
i
Set the Receive Mode to
External TAD. (See Choose the
correct Receive Mode on page 44.)
Telephone services and external devices
Recording an outgoing
message (OGM) on the
external TAD
Timing is important in recording this
message. The way you record this message
will affect both manual and automatic fax
reception.
a
Record 5 seconds of silence at the
beginning of your message. (This allows
your machine time to listen for the fax
CNG tones of automatic transmissions
before they stop.)
b
Limit your speaking to 20 seconds.
c
End your 20-second message by giving
your Fax Receive Code for people
sending manual faxes. For example:
"After the beep, leave a message or
send a fax by pressing l 5 1 and Start."
NOTE
We recommend beginning your OGM with
an initial 5-second silence because the
machine cannot hear fax tones over a
resonant or loud voice. You may try
omitting this pause, but if your machine
has trouble receiving, then you must
re-record the OGM to include it.
6
6
57