Document Jam/too Long The document was not inserted or fed
DR Mode in Use
Hub is Unusable.
Image Too Long
Image Too Small
properly, or the document scanned
from the ADF was too long.
The machine is in Distinctive Ring
mode. You cannot change the
Receive Mode from Manual to
The print head is too warm.
A hub or USB Flash memory drive
with hub has been connected to the
USB direct interface.
The proportions of your photo are
irregular so effects could not be
The size of your photo is too small to
(See Using the ADF on page 36.)
(See Document jam on page 101.)
Set Distinctive Ring to Off. (See
Turning off Distinctive Ring
on page 55.)
Allow the machine to cool down.
Hubs, including USB Flash memory
drives that have a hub built in, are not
supported. Unplug the device from
the USB direct interface.
Choose a regularly proportioned
Choose a larger image.