Jenn-Air JDR8895BAB Installation & Use Manual page 18

Prepare Cooktop:
Remove plastic items from the cooktop because they may
melt.
IMPORTANT:
Oven temperature must be below 400°F (205°C) to program a
clean cycle.
Only 1 oven can be cleaned at a time.
Both oven doors lock when either oven is being cleaned.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks and
popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning soil
to a powdery ash.
The oven is preset for a 3 hour clean cycle, however the time can
be changed. Suggested clean times are 2 hours for light soil and
between 3 hours and 4 hours for average to heavy soil.
Once the oven has completely cooled, remove ash with a damp
cloth. Do not wipe down any of the inside surfaces until the oven
has completely cooled down. Applying a cool damp cloth to the
inner door glass before it has completely cooled could result in
the glass breaking.
The oven light will not work during the Self-Cleaning cycle.
When "LOCK" shows in the display, the door cannot be opened.
To avoid damage to the door, do not force the door open when
"LOCK" is displayed.
If an oven door is left open, "door" will appear in the display and
a signal will beep until the door is closed and CLEAN is pressed
again.
To Self-Clean:
1. Close the oven door.
2. Press CLEAN. "CLEAN," "SET," and "UPPER" or "LOWER"
will flash in the display.
3. Press AUTOSET.
MEd (Medium soil, 3 hours) appears in the display.
If the door is not closed, oven will beep and "door" will
appear in the display until the door is closed and the Clean
pad is pressed again. If the door is not closed within
30 seconds, the self-cleaning operation will be canceled
and the display will return to the time of day.
4. To choose a clean setting other than medium, press
AUTOSET to scroll through the self-cleaning settings.
HVy (heavy soil, 4 hours)
MEd (medium soil, 3 hours)
LITE (light soil, 2 hours)
Choosing the soil level of the oven automatically programs
the self-cleaning time.
5. After 4 seconds, the oven will start cleaning.
"CLEAN" will appear in the display. "LOCK" will flash in the
display. Once both the oven doors lock, "LOCK" will remain
lit. The cleaning time will count down in the display.
When the self-clean cycle ends:
"LOCK" will turn off approximately 1 hour after the end of the
clean cycle. The door can then be opened.
18
To Delay Start Self-Clean:
Before delay starting Self-Clean, make sure the door is closed
completely or it will not lock and the cycle will not begin.
1. Press DELAY once for upper oven or twice for lower oven.
"DELAY," "00:00," and "UPPER" or "LOWER" will flash in the
display.
2. Using the number pads, enter the amount of time you want to
delay the cycle. Delay time can be set from 10 minutes
(00:10) to 11 hours and 59 minutes (11:59).
3. Press CLEAN.
"SET" flashes in the display.
4. Press AUTOSET.
"MEd" (medium soil level) is displayed.
5. To choose a clean setting other than medium, press the
AUTOSET to scroll through the self-cleaning settings.
HVy (heavy soil, 4 hours)
MEd (medium soil, 3 hours)
LITE (light soil, 2 hours)
Choosing the soil level of the oven automatically programs
the self-cleaning time.
After 4 seconds, "CLEAN," "DELAY," and "UPPER" or
"LOWER" will light and "LOCK" will flash in the display.When
both oven doors lock, "LOCK" will stop flashing and stay lit to
show that the oven is set for a delayed clean operation. The
delay time is displayed.
To change the delay self-clean time:
1. Press DELAY.
"DELAY" flashes and "00:00" will appear in the display.
2. Press the number pads to enter the amount of time you want
to delay the cycle.
After 4 seconds, "CLEAN," "DELAY," and "LOCK" will appear
in the display to show that the oven is set for a delayed clean
operation. The delay time is displayed.
When the self-clean cycle starts:
"DELAY" will turn off and the clean time will appear in the display.
When the self-clean cycle ends:
"LOCK" will turn off approximately 1 hour after the end of the
clean cycle. The door can then be opened.
To Stop Self-Clean Anytime:
Press CANCEL or STOP. All words disappear from the display. All
functions are canceled. The time of day appears in the display.
Depending on the actual oven temperature when self-clean is
canceled, the oven door may remain locked until the oven cools.