Adjusting In-Rip Scale Indicator - Craftsman 113.234701 Owner's Manual

Alignment and Adjustment
spreader does not rest flat against
fence, go to step 6.
6. Use a/2"wrench to loosen both
spreader nuts. Slide spreader against
fence. Tighten spreader nuts.
7. Unlock pawls/spreader lock, raise
pawl/spreader unit up to guard and lock
in place. Leave saw in this position to
adjust in-rip scale indicator.
Spreader
Nut
Adjusting In-Rip Scale Indicator
1. With saw in in-rip position and blade
against fence, align in-rip scale indicator
with 0.
r
J
In-Rip Scales
In-Rip Scale__
Indicator
37