Craftsman 113.234701 Owner's Manual page 25

Controls
Swivel Index _
Pin
Swivel Lock
Miter Index Pin
Control
Function
Miter
_
Lock
o Table Clamp
Screw
Operation!Comments
Swivel Lock
Frees blade carriage to rotate
between crosscut and rip posi-
tion; locks in place
Pull to unlock; push to lock
Works with swivel index pin
Swivel Index Pin
Miter Lock
After swivel lock is unlocked,
allows carriage to rotate to in-
dexed positions for crosscut,
in-rip, out-rip
Frees radial arm and column
to rotate into desired miter
position
Push down and hold while
rotating carriage, then release
Then lock swivel lock
Move clockwise to lock,
counterclockwise to unlock
Works with miter index pin
Miter Index Pin Locates radial arm and column
in indexed miter positions at
0 °, 22.5 ° right and left, and 45 °
right; allows arm to be set at
any miter position
Pull out and hold while
moving arm to any indexed
position, then release. To set
to a non-indexed position,
pull out, turn 90 ° and release
to lock out; move arm to any
miter position
Then lock miter lock
Table Clamp
Screw
Frees table sections to allow
fence changing
Turn clockwise to tighten,
counterclockwise to loosen
25