Ripping
6. Unlock
rip lock, position
blade
desired
distance
from fence, and lock
rip lock.
Rip
In-Rip Position
7. Turn elevation
handle
clockwise
to
lower blade until it just clears table.
8. Plug in saw, put yellow key in switch
and turn saw on.
9. Slowly turn elevation
handle
clock-
wise until blade touches
table, then con-
tinue to turn another
half turn.
*_WARNING:
For workpieces
v4" thick
or less,
turn elevation
handle a full turn after
the blade just touches
table. Deeper
kerr will keep saw blade from rising
up on top of workpiece
and violently
throwing
it.
10. Turn switch off, remove
yellow key,
unplug saw.
59