Table of Contents
Advertisement
:I__11/ 1 _l'I Il !,.'tI__II Izl i [e] _
WARNING:
To avoid electric shock, disconnect the test leads
I
from any source of voltage before removing the battery cover.
J
1. Turn power off and disconnect
the test leads from the meter.
2. Open the rear battery cover by removing two screws (B) using
a Phillips head screwdriver.
3. Insert the battery into battery holder, observing the correct
polarity.
4. Put the battery cover back in place. Secure with the screws.
I WARNING:
To avoid electric shock, do not operate the meter
until the battery cover is in place and fastened securely.
!
NOTE: If your meter does not work properly, check the fuses and
batteries to make sure that they are still good and that they
are properly inserted.
A
A
F1
F2
11
Hide quick links:
Advertisement
Table of Contents
