Battery Installation - Craftsman 82354 Owner's Manual

Polarity
Measurement Rate
Low Battery Indicator
Batteries
Operating Temperature 41ºF to 104ºF (5ºC to 40ºC)
Storage Temperature
Operating Humidity
Storage Humidity
Operating Altitude
Weight / Size
Safety

BATTERY INSTALLATION

WARNING: To avoid electric shock, disconnect the test leads
from any source of voltage before removing the battery cover.
1. Turn the FUNCTION dial to the OFF position.
2. Disconnect the negative (common) test lead from the meter.
3. Fully retract the positive test lead probe.
4. Remove the rear battery cover by removing the Phillips head
screw at the rear center of the meter housing.
5. Insert two 1.5V 'AAA' batteries observing the correct polarity.
6. Put the battery cover back in place and secure with the screw.
WARNING: To avoid electric shock, do not operate the meter
until the battery cover is in place and fastened securely.
NOTE: If your meter does not work properly, check the fuses and
battery to make sure that they are still good and that they
are properly inserted.
Automatic (no indication for positive
readings)
Minus (-) sign for negative readings.
2 times per second, nominal
" " is displayed to alert battery
replacement
Two (2) 1.5V 'AAA' batteries
o o
-4 F to 140 F (-20
Max 80% up to 87ºF (31ºC) decreasing
linearly to 50% at 104ºF(40ºC)
<80%
6560ft. (2000meters) operating
3.9oz (110g) / 8.2 x 1.5 x 1.1"(208 x 38
x 29mm)
For indoor use and in accordance with
the requirements for double insulation
to IEC1010-1 (1995): EN61010-1
(1995) Overvoltage Category III,
Pollution Degree 2.
8
o o
C to 60 C)