Installing Your Software - Epson Stylus pro5k Important Information Manual

Installing Your Software

To install your non-PostScript printer driver in Windows 98,
see "Installing the Printer Software in Your PC" on page 2-10 in
your Setup Guide for instructions. The instructions apply to
both Windows 95 and 98.
Follow the steps below to install your non-PostScript printer
driver on a Macintosh using the EPSON USB/Parallel Adapter.
NOTE:
If your iMac is running OS 8.1, you need to update your
operating system before installing your printer software.
Download and install the iMac Update 1.0 or later from Apple
at http:// swupdates.info.apple.com. Contact Apple if you have
problems installing the update.
If your iMac is running OS 8.5 or 8.5.1, do not install iMac
Update 1.0. Instead, Apple recommends that you download and
install iMac Update 1.1.
To find out which operating system your iMac is running, select
About This Computer in the Apple menu.
1. Make sure your printer and computer are connected and
turned off.
2. Turn on your computer and wait until you see the icons on
your desktop.
3. Turn on your printer and wait until the green P
light stops flashing.
4. Insert the printer software CD-ROM in your drive.
5. Double-click the EPSON
6. At the printer driver installation screen, click
icon.
Installer
Continue
Operate
.
9