Configuring For A Network; Macintosh Users - Epson Stylus pro5k Important Information Manual

Configuring for a Network

This section contains information not provided in your Setup
Guide or Reference Guide. Before you can use your printer on
a network, you must configure your computer as described in
this section.

Macintosh Users

To set up the printer so that you can use it on an AppleTalk
network, you need an optional EPSON Ethernet interface card
for your printer.
You'll first need to install the printer software on all the
computers (see page 9). Then follow these steps:
1. Turn on your printer.
2. Open the
or a specific Ethernet slot.
3. If prompted, click
4. Open the
the
12
AppleTalk Control Panel
.
Save
from the Apple menu and click
Chooser
icon.
and choose
Ethernet