Connecting Your Printer With The Epson Usb/Parallel Adapter - Epson Stylus pro5k Important Information Manual

Connecting Your Printer with the EPSON
USB/Parallel Adapter
To connect your printer to your PC with a parallel cable, see
"Connecting the Printer to Your PC" on page 2-9 in your Setup
Guide for instructions. To connect your computer and printer
with the EPSON USB/Parallel Adapter, follow the steps below.
You can connect your printer directly to a port on your
computer or to a USB hub. If you have any printing problems
when the printer is connected via a USB hub, try connecting the
printer directly to the computer instead.
1. Turn off the printer and computer.
2. To connect to a Power Macintosh G3, connect the
USB/Parallel Adapter into an available USB port on the
back of your computer.
To connect to an iMac, first open the port door. Hold the
cable so the
into an available USB port.
If you're using a USB hub, plug the hub into the USB port
on your computer, then plug the USB end of the EPSON
USB/Parallel Adapter into an available port on the hub. If
you have more than one hub, connect the EPSON
USB/Parallel Adapter into the first hub.
To connect the EPSON USB/Parallel Adapter to one of the
USB ports on the keyboard, hold the USB connector so the
icon faces away from you and plug it into the USB port.
3. Connect the parallel end of the cable to the printer's parallel
connector, then fasten it with the wire clips.
8
icon faces up and then plug the connector