Extension Cords - Craftsman 172.26672 Owner's Manual

CLEANING
i ,
/_ WARNING:
To avoid accidents, AUNAYS disconnect the tool from the power source BEFORE cleaning or pe<fecming any maintenance.
n
/_ CAUTION:
Certain cleaning agents and solvents cause damage
to the plastic parts. These include gasoline, carbon tetrachledde,
chlorinated deablng solvents, ammonia and household detergents
that contain ammonia.
t. Use a clean cloth to remove dirt, carbon dust, etc.
2. Electric tools are subject to accelerated wear and possible premature failure
when they ere used to work on fiber glass boats, sports cam, etc. The fiber
glass chips and grindings are highly abrasive to electrical tool parts, such as
bearings, brushes, commutators, etc. Consequently, _t is not recommended
that this tool be used for extended work on fiber glass. During any use on
fiber glass, it is extremely important that the too_is cleaned frequently with
compressed air.
J Z_ WARNING: ALWAYS wear safety g°ggles when cleanthg t°°ls Jwith compmssed air.
IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment MUST be performed by a Sears Service Center.
The following recommended accessories are currerd]y available at
• your local Sears Store.
BLADES
Sears has a la_e selection of recipmcafing saw blades in a variety of lengths
and teeth per inch that are ideal for a wide variety of cutting needs. Choose
blades for cutting wood only, blades for metal cult+rigonly and general-purpose
blades that cut wood or metal.
EXTENSION CORDS
Sears offers a large selection of extension cords that help extend your
working range.
i
I Z_ WARNING: The use of attachments or accessories that are not
recommended might be dangerous.
I
13