Lcd Messages; Local Menu Configuration Messages - Altigen 705 User Manual

LCD Messages

Register failed
LCD Messages

Local Menu Configuration Messages

The following messages may be displayed in the LCD when accessing the
IP 705 phone's menu:
Message
conf timeout!
conf exception!
Saved!
Write Fail!
Wrong Ext Number!
Wrong input!
wrong password!
38 IP 705 Manual
•
Check to make sure the extension number and
extension password are set up properly and that the
system administrator enabled the IP extension.
•
System administrator should make sure the IP Phone
Service is started in AltiWare.
•
If an analog phone or other IP phone is already
logged on to the same extension, rebooting the IP
705 will not register the phone successfully. You
must press #27 on the IP phone to actively log on to
AltiServ. After the extension is logged on and
activated, the calls are redirected to this IP phone.
Explanation
After 2 minutes inside the configuration menu, if no
action is taken, the LCD will show this message and then
quit the menu.
During configuration, an unknown exception occurred.
The changed configuration was saved into memory.
Error occurred when saving the changed options into
flash ROM.
The inputted extension number is invalid.
User inputted an invalid value or string during
configuration.
User is trying to configure an invalid password from the
phone menu.