Removing The Driver - Xerox Synergix 8825 Software Manual

Removing the Driver

1. To remove the PostScript Print Driver, from the Windows NT 4.0 desktop
click on "Start," "Settings," "Printers."
2. Right click on the icon representing your PostScript printer.
3. Select Delete from the drop down menu.
4. Click Yes when prompted. This will remove the PostScript Print Driver
from your Windows NT 4.0 operating system.
5. You may want to run Windows Explorer to remove the files that were
created when the original driver file was downloaded from the Internet
and then unzipped to a default location on your hard drive.
6. Refer to the Release Notes that accompanied the driver for additional
files that you might wish to remove.
XES Synergix 8825/8830/8850/8855 Windows NT 4.0 PostScript Print Driver User Guide 23