System Information Menu - Xantrex Prosine PS2.5 Installation And Operation Manual

ACS Control Panel

System Information Menu

The System Information menu displays the current system startup mode, audible alarm mode, last
system fault number, chassis temperature at four areas in the inverter/charger, and the system buss
voltage. All except the system startup mode and audible alarm mode settings are troubleshooting aids.
All the system information configuration parameters can be reset to the factory configuration by
entering a special key sequence in this menu. See
instructions.
*This menu is seen in Installer mode
only. See
page
18
SELECT FROM:
SYSTEM INFO
"ACS Configuration‚" on
28".
"ACS Configuration‚" on page 28
SYSTEM INFO:
ENTER
DEFAULT INV/
SYSTEM INFO:
ALARM
SYSTEM INFO:
LAST FAULT #
CHASSIS TEMP.
T1:
CHASSIS TEMP:
T2:
CHASSIS TEMP:
T3:
CHASSIS TEMP:
T4:
SYSTEM INFO:
DC BUS: 220Vdc
*SYSTEM INFO:
RESET TO
Prosine 2.5/3.0 Installation & Operation Guide
for configuration