Configuring The Freedom Sw Using The Scp; System Menu Map - Xantrex Freedom SW Series Owner's Manual

Configuring the Freedom SW using the SCP

This section contains information about all configurable
settings and procedures for the Freedom SW.
It provides information on using the SCP to configure the
Freedom SW settings for optimal performance. Please refer to
the Xanbus System Control Panel Owner's Guide for detailed
information on how to use the SCP.

System Menu Map

Figure 16 provides a map of how the SCP screens and menus
are organized. The order of devices appearing on the SCP will
vary, depending on the order in which they've been connected
to the network.
97-0019-01-01
Power Up
Startup Screen
System Status
Battery 12.1V -257A 84"F
BatLev Invert
Load 120V 12A
AC In 0V 0A
menu EnInv EnChg Shr
Select Device
System Settings
FSW3012 00
XAGS 00
XSCP
FSW Inv/Chg Device Setup
AGS Device Setup
SCP Device Setup
FSPM Device Setup
Figure 16 SCP System Menu Map
Optional device - the menu
screen will appear only
when the device is installed.
System Settings
Clock
39