Table of Contents
Advertisement
SYMBOL KEY'
The symbols shown below are used in this Use and Care Manual and
are a part of the clock/display on the oven control panel. To get the
most from your oven, read through the following descriptions and
become familiar with the symbols.
Y
A solid arrow indicates which function (timer,
bake hours,
stop
time, or clean) you are
using. When you set the timer for one minute
the solid arrow shows you that you are using
the minute/second
timer function.
To return to the amount of cooking time remain-
ing, push the button under the flashing arrow
(bake hours button).
DISPLAY WILL SHOW:
DISPLAY WILL SHOW:
If you want to check the time of day, push the
minutelsecond timer and bake hours buttons
at the same time.
\1/
A flashing arrow shows you the functions you can
check while you are using another function.
Example: When you set timed bake for 21/2hours.
DISPLAY WILL SHOW:
DISPLAY WILL SHOW:
To find out what the stop time is, push the button
below the flashing arrow (stop time button).
DISPLAY WILL SHOW:
s
/_
Both arrows will flash when you return to or
check the time of day. This is to remind you that
you have programmed
your oven for TIMED
BAKED or CLEAN.
You can check the bake hours, stop time, or
time of day throughout the cooking time by fol-
lowing the steps given previously.
The heated casserole dish indicates that the
oven is operating.
The "C"
indicates the self-cleaning
function
has been programmed.
Throughout the rest of this manual, these control symbols will be used
to help you program the oven control. The buttons and knobs which
you will be instructed to use will be shaded.
HOW TO SET THE CLOCK
Immediately after your range is powered "88:88" will flash in the dis-
play until time of day is set.
To set the time of day: Push in and hold minute/second
timer button
and bake hours button at the same time while turning set time knob.
DISPLAY WILL SHOW:
The time of day is now set. To change the time of day, repeat the
procedure given.
NOTE: Time of day cannot be changed when the "TIMED BAKE" or
"CLEAN"
functions have already been programmed. This is a 12-
hour clock which does not distinguish between AM and PM.
To check the time of day (whenever another function has been pro-
grammed): Push in both the minute/second
timer button and bake
hours button at the same time.
Advertisement
Table of Contents
