Windsor chariot iSCRUB CS24 10060210 Operating Instructions Manual page 14

DRIVE CONTROLS
6. SPEED CONTROL SWITCH
Controls the maximum speed of the machine. There are two setting intended for scrubbing, speeds 1 and 2.
Speed 3 is recommended for transport only, not scrubbing.
To increase speed, press the top of the switch.
To decrease speed, press bottom of the switch. Speeds can be adjusted at any time, whether machine is
moving or not.
Basic: The position of the switch indicates speed setting.
Deluxe: The display indicates speed setting. When the key is turned on the controller will automatically
adjust the speed to setting 2.
7. DRIVE RESET SWITCH
This safety feature is designed to ensure safe engagement of propel drive. Each time the machine power is
turned on, and each time an operator steps on to the platform, the Drive Reset Switch must be pushed
before machine will propel.
8. HORN BUTTON
The horn is activated by pressing the horn button.
9. STEERING WHEEL
The steering wheel turns the front wheel causing the machine to change direction.
3-7
86037660 CHARIOT 11/09/06