Top; Operating Range - Sanyo XL51 - PLC XGA LCD Projector Owner's Manual

Top

q ALARM indicator
Blinks red to indicate the battery condition or key
operation.
w POWER indicator
– Lights red when the projector is in stand-by mode.
– Lights green during operations.
– Blinks green in the Power management mode (pp.50,
70).
e WARNING indicator
– Lights red when the projector detects an abnormal
condition.
– Blinks red when the internal temperature of the
projector exceeds the operating range (pp.60, 70).
r LAMP REPLACE indicator
Turn yellow when the life of the projection lamp draws to
an end (pp.63, 70).
t
ON/STAND-By button
Turn the projector on or off (pp.20-21).
w
q
t
y
u
i
Part Names and Functions
e r
y
INPUT button
Select input source (pp.27 , 37 , 38).
7 8
POINT ( ed
u
) buttons
– Select an item or adjust the value in the On-Screen
Menu (p.22).
– Pan the image in Digital zoom + mode (p.36).
– Adjust the volume level (Point
– Adjust the screen size (Point ed buttons) (p.24).
i SELECT button
– Execute the selected item (p.22).
– Expand or compress the image in Digital zoom mode
(p.36).
o
KEySTONE button
Correct the keystone distortion (pp.24, 45).
!0
MENU button
Open or close the On-Screen Menu (p.22).
o
!0
7 8
buttons) (p.25).
11