Connecting To A Computer - Sanyo XL51 - PLC XGA LCD Projector Owner's Manual

Installation

Connecting to a Computer

Cables used for connection
• VGA Cables (Mini D-sub 15 pin)*
• Audio Cables (Mini Plug: stereo)
(*One cable is supplied; other cables are not supplied with the projector.)
Audio Output
Audio cable
(stereo)
AUDIO IN
COMPUTER
✔Note:
•Input sound to the AUDIO IN COMPUTER terminal when
using the COMPUTER IN 1 and the COMPUTER IN 2/
MONITOR OUT terminal as input.
•When the AUDIO OUT is plugged-in, the projector's
built-in speaker is not available.
•When the cable is of the longer variety, it is advisable to
use the COMPUTER IN 1 and not the COMPUTER IN 2
/MONITOR OUT.
•See page 73 for ordering optional cables.
16
Monitor Output
Monitor Output
Monitor Input
VGA cable
COMPUTER IN 2/
COMPUTER IN 1
MONITOR OUT
External Audio Equipment
or
VGA cable
AUDIO OUT
(stereo)
This terminal is switchable. Set up the
terminal as either Computer input or
Monitor output (see page 49).
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting the cables.
Audio Input
Audio cable
(stereo)