Mounting The Rear Leg And The Stand - Sanyo XL51 - PLC XGA LCD Projector Owner's Manual

Mounting the Rear Leg and the Stand

Rear Leg
1
Turn off the projector and unplug the AC power cord.
2
Secure the rear leg with the four (4) screws.
Stand*
1
Turn off the projector and unplug the AC power cord.
2
Secure the stand with three (3) sets of the screw
with a washer.
* The stand is included in standard accessories.
✔Note:
•Make sure not to lose screws when installing the rear leg
or the stand.
Installation
Screw
Rear leg
Stand
Screw with
a washer
15