Installing The Projector In Proper Position - Sanyo XL51 - PLC XGA LCD Projector Owner's Manual

Installing the Projector in Proper Position

Install the projector properly. Improper Installation may reduce the lamp life and cause fire hazard.
Side A
Side C
Side D
✔Note:
•Fix the projector when installing it so that the
projector would not fall down.
CAUTION ON CEILING MOUNTING
For ceiling mounting, you need the ceiling mount kit designed for this projector. When not
mounted properly, the projector may fall, causing hazards or injury. For details, consult your
dealer. The warranty on this projector does not cover any damage caused by use of any non-
recommended ceiling mount kit or installation of the ceiling mount kit in an improper location.
Side B
Side E
Side F
10˚
10˚
This side is Side A or B.
5˚
5˚
5˚
5˚
Safety Instructions
CAUTION
– Do not put anything or sit on the
projector, otherwise, it may fall down
or cause failure of the projector or
injury.
– Choose the running speed of cooling
fans in the fan control setting
according to the altitude in which the
projector is being used (p.54). Failure
to do so may affect the projector life.
Do not roll the projector more
than 10 degrees from side to
side.
Do not put the projector on
either side C or E to project an
image.
Do not roll the projector more
than 5 degrees from side
to side when side A or B is
downward.
7