Set <Movx> Unit To 8 Dots <Movxbyte - Epson STYLUS 870 Programming Manual

6.36 Set <MOVX> unit to 8 dots <MOVXBYTE >"
Format:
<11100100>B
Format: <11100100>B
Range of Values for Parameters:
Function:
1) The unit set by the ESC (U command is taken as standard, and 8 times that unit is
taken as 1 unit for the MOVX command.
2) The printing position in the X direction is taken as the origin upon the X axis.
Initial State:
<MOVXDOT> is set.
Related Commands:
Commands related in the direction of applying an effect (Setting)
None
Commands related in the direction of receiving an effect (Setting)
None
Commands related in the direction of applying an effect (Operation)
None
Commands related in the direction of receiving an effect (Operation)
The unit is set by the ESC (U command.
EPSON Imaging Technology Center
Revision: 1
-
Page: 62
10/6/00