Carriage Return "Esc Em N - Epson STYLUS 870 Programming Manual

6.4

Carriage return "ESC EM n"

Format:
ASCII
Hex
Decimal
Function:
Sets controls for paper loading/ejecting
Range of Values for Parameters:
n=31H, 52H
(="1", "R")
Function:
1) Control of the CSF (cut sheet feeder) is performed as follows, according to the
value of n:
n=31H select bin 1
n=52H eject paper
2) If n has any value other than the above, this command is ignored.
3) ESC EM R is only valid for paper which has been fed from the CSF. For any
other paper, this command is ignored.
4) Bin selection setting is valid from the next time paper is fed.
5) With ESC EM R, the printing position in the X direction is set to the origin on the
X axis.
Initial State: -
Related Commands:
Commands related in the direction of applying an effect (Setting)
None
Commands related in the direction of receiving an effect (Setting)
Returned to initial state by the ESC @ command.
Commands related in the direction of applying an effect (Operation)
None
Commands related in the direction of receiving an effect (Operation)
None
EPSON Imaging Technology Center
Revision: 1
ESC EM n
1B 19 6E
27 25 110
Page: 24
10/6/00