Select Color "Esc - Epson STYLUS 870 Programming Manual

6.18 Select color "ESC (r nL nH m n"
Format:
ASCII
Hex
Decimal
Range of Values for Parameters:
nL=02H, nH=00H
m=00H,01H
n=00H, 01H, 02H, 04H
Function:
1) The print color is selected according to the values of m and n.
2) If either m or n has a value other than those above, this command is ignored.
3) This command is only effective in graphics mode.
Initial State: Black is selected.
Related Commands:
Commands related in the direction of applying an effect (Setting)
None
Commands related in the direction of receiving an effect (Setting)
The ESC @ command selects black.
Commands related in the direction of applying an effect (Operation)
None
Commands related in the direction of receiving an effect (Operation)
The ESC (G command sets graphics mode.
EPSON Imaging Technology Center
Revision: 1
ESC ( r
1B 28 72
27 40 114
m n
00H 00H
00H 01H
00H 02H
00H 04H
00H 01H
00H 02H
nL nH m
nL nH m
nL nH m
Print color
Black
Magenta
Cyan
Yellow
Light Magenta
Light Cyan
n
n
n
Page: 39
10/6/00