Program Setting And Software Download; Icp Board Software Download - NEC NP-NC900C-A Service Manual

PROGRAM SETTING AND SOFTWARE DOWNLOAD

1. PROGRAM SETTING AND SOFTWARE DOWNLOAD

1-1. ICP Board Software Download

ICP BD Firmware Update
1) AC-ON projector.(in standby mode)
2) Connect DCC to the projector and enter service mode.
3) Go to DCC - [UPDATE] page, click on <ICP firmware>.
Caution) For Service Mode (Service Menu), refer to P61 ~ 63 in the Installation Manual.
"Confidential, Do Not Duplicate without written authorization from NEC."
9-1