Using The Downloadable Software - NEC U300X User Manual

Introduction
 When "Computer
1" is selected for input,
the Virtual Remote
screen or the toolbar
will be displayed as
well as your computer
screen.
 Use the supplied
computer cable (VGA)
to connect the COM-
PUTER 1 IN connector
directly with the moni-
tor output connector
of the computer to use
Virtual Remote Tool.
Using a switcher or
other cables than the
supplied computer
cable (VGA) may
cause failure in signal
communication.
VGA cable connector:
Pin Nos. 12 and 15 are
required for DDC/CI.
 Virtual Remote
Tool may not work
depending on your
computer's specifica-
tions and version of
graphic adapters or
drivers.
 The projector does
not support the LAN
automatic search fea-
ture of Virtual Remote
Tool. To connect the
projector, register an
IP address manually.
English ... 14

Using the Downloadable Software

Using the Computer Cable (VGA) to Operate the
Projector (Virtual Remote Tool)
Using the utility software "Virtual Remote Tool" that you can
download from our web site (http://www.nec-display.com/
dl/en/index.html), Virtual Remote screen (or toolbar) can be
displayed on your computer screen.
This will help you perform operations such as projector's power
on or off and signal selection via the computer cable (VGA), se-
rial cable, or LAN connection.
Virtual Remote screen
This section provides an outline of preparation for use of Virtual Re-
mote Tool.
For information on how to use Virtual Remote Tool, see Help of Vir-
tual Remote Tool. (-> page 18)
• Step 1: Install Virtual Remote Tool on the computer. (-> page 15)
• Step 2: Connect the projector to the computer. (-> page 16)
• Step 3: Start Virtual Remote Tool. (-> page 17)
TIP:
• Virtual Remote Tool can be used with a LAN and a serial connection.
• For update information on Virtual Remote Tool, visit our website:
http://www.nec-display.com/dl/en/index.html
TIP:
• The projector's COMPUTER 1 IN connector supports DDC/CI (Display
Data Channel Command Interface). DDC/CI is a standard interface for
bidirectional communication between display/projector and computer.
Toolbar