Density Tune Up - Lexmark X500n Service Manual

7100-XXX

Density Tune Up

These settings adjust the density of the separate color planes for the copy, scan, and fax functions. These
settings should not be adjusted without second-level support center supervision.
The density tune-up menu items can be accessed using the
settings. When the desired modem setting is displayed, press
Copy
The COPY settings submenu items can be accessed using the
individual settings. When the desired modem setting is displayed, press
individual density setting can be adjusted by using the
value. When the desired value is displayed, press
submenu item.
Density Notch 1 (0-255) +127 is the default.
Density Notch 2 (0-255) +127 is the default.
Density Notch 3 (0-255) +127 is the default.
Density Notch 4 (0-255) +127 is the default.
Density Notch 5 (0-255) +127 is the default.
Scan
The SCAN settings submenu items can be accessed using the
individual settings. When the desired setting is displayed, press
density setting can be adjusted by using the
When the desired value is displayed, press
item.
Density Notch 1 (0-255) +127 is the default.
Density Notch 2 (0-255) +127 is the default.
Density Notch 3 (0-255) +127 is the default.
Density Notch 4 (0-255) +127 is the default.
Density Notch 5 (0-255) +127 is the default.
Fax
The FAX settings submenu items can be accessed using the
settings. When the desired setting is displayed, press
can be adjusted by using the
value is displayed, press
Normal (0-255) +127 is the default.
Dark (0-255) +127 is the default.
Light (0-255) +127 is the default.
3-8
Service Manual
and
to accept and set the value. Press
and to increment or decrement the density value. When the desired
to accept and set the value. Press
Lexmark confidential until announce edited 1/4/2007
and keys to navigate to the individual
to select the item.
and keys to navigate to the
to select the item. Each
and to increment or decrement the density
to accept and set the value. Press
and keys to navigate to the
to select the item. Each individual
to increment or decrement the density value.
and keys to navigate to the individual
to select the item. Each individual density setting
to exit the submenu item.
to exit the
to exit the submenu