Transporting The Printer - Epson PRO Reference Manual

Transporting the Printer

If you need to transport your printer, carefully repack it in the
original box and packing materials as follows:
1. Press the Pause button, and then turn off the printer.
2. Open the printer cover and make sure that the print head
is locked in the far right position. If it isn't, turn on the
printer, wait about 10 seconds, and turn it off.
c
3. Use a strong adhesive tape to secure the print head to the
side of the printer.
4. Unplug the power cord from the electrical outlet.
5. Disconnect the interface cable from the printer.
6. Remove the output tray from the top of the paper tray and
remove any paper.
7. Remove the paper tray from the printer.
8. Attach the protective material to the printer. See the Notice
Sheet that was packed with the printer.
9. Repack the printer and attachments in the original box.
Keep the printer flat during transport.
Caution:
Do not remove the ink cartridges when transporting the
printer. Transporting the printer without the cartridges
installed can damage it.
Maintenance and Troubleshooting
3-9