Turning On The Printer's Network Interface Mode - Epson PRO Reference Manual

Turning On the Printer's Network Interface Mode

If you encounter problems when using the printer on a
network, you may need to turn on the printer's network mode
using the buttons on the control panel. Follow these steps:
1. Make sure the printer is off and paper is loaded in the paper
tray.
2. While holding down the Economy/Condensed button,
turn on the printer. (Hold the button down for
approximately 5 seconds.)
After the printer warms up, it prints a page listing the
available control panel languages.
3. Unless you want to change the language of the control
panel, press the Alt button. (Press the Font button to change
the control panel language.)
The printer prints two instruction sheets that describe how
to change default printer settings.
4. Press the Font button until the Courier and Sans Serif H
lights are on and the Roman T light is off.
5. Press the Alt button until the Operate light is on and the
Data and Paper Out lights are off.
6. Turn off the printer.
A-4
Using Optional Interfaces