Wrong Tear-Off Position - Epson LQ-570e User Manual

Wrong tear-off position

The printer prints on (or too far away from) the perforation of
your continuous paper.
Cause
The tear-off position setting
is incorrect.
You moved the paper using
the knob while the printer
was on.
c
Caution:
Never use the knob to adjust the tear-off position; this may damage the
printer or cause it to lose the tear-off position.
The printer you want to use
is not selected in your
software.
The paper size setting in
your application or printer
driver does not match the
size of the paper you are
using.
The printer's page length
settings for the tractor do not
match the size of the
continuous paper you are
using.
7-10
Troubleshooting
What to do
Adjust the tear-off position using the
micro adjust feature. See "Adjusting
the tear-off position" on page 2-35.
Adjust the tear-off position using the
micro adjust feature. See "Adjusting
the tear-off position" on page 2-35.
Choose the correct printer from the
Windows desktop or in your
application before printing.
Check the paper size setting in your
application or printer driver.
Check the page length settings for the
tractor using the printer's default-
setting mode or the EPSON Remote!
utility. See "About Your Printer's
Default Settings" on page 5-4 or
"Using the EPSON Remote! Utility"
on page 4-30.