The table below shows the types of paper you can load in the top
and front paper slots and the paper thickness lever setting for each
paper type. For more information on the paper thickness lever,
see "Setting the Paper Thickness Lever" on page 2-4.
Paper type
Ordinary single-sheet paper
Multipart forms (carbonless)
2 parts (original + 1 copy)
3 parts (original + 2 copies)
4 parts (original + 3 copies)
5 parts (original + 4 copies)
Postcards
Envelopes
Note:
If the printed image is smeared, you may need to set the paper
thickness lever one position higher to improve print quality.
If the printed image is faint or has many gaps, you may need to set
the paper thickness lever one position lower to improve print quality.
Do not load paper that is damaged, curled, or has been folded.
Available
paper slots
Top and front
Front
Top and front
Top
Printing on Single Sheets
Paper thickness
lever position
-1 or 0
1
2
3
5
2
2 to 6
3-3
3