Epson LQ-570e User Manual page 147

The printer does not fully eject a single sheet.
Cause
Your paper is too long.
The optional cut-sheet feeder does not feed your single-sheet
paper properly.
Cause
The cut-sheet feeder is not
installed properly.
Too many sheets are loaded
in the cut-sheet feeder.
The edge guides of the
cut-sheet feeder are not
positioned correctly.
There is only one sheet left in
the bin.
What to do
Press the Load/Eject button to eject
the sheet. Make sure the page length
of your paper is within the range
specified for single-sheet paper in
Appendix C. Also check and adjust
the paper size setting in your
application or printer driver.
What to do
Reinstall it as described in "Installing
an optional cut-sheet feeder" on page
A-6.
Load no more than 150 single sheets in
the high-capacity cut-sheet feeder. See
"Switching between continuous
paper and single-sheet paper in the
cut-sheet feeder" on page A-18 for
more information.
Align the left edge guide with the
arrow mark, then move the right edge
guide to match your paper's width.
Load more paper in the cut-sheet
feeder.
Troubleshooting
7
7-7