Epson LQ-570e User Manual page 153

Lines of dots are missing in the printout.
Cause
The print head is damaged.
c
Caution:
Never replace the print head yourself; you may damage the printer. Other
parts of the printer must also be checked when the print head is replaced.
All the text is printed on the same line.
Cause
No line feed command is
sent at the end of each line of
text.
The printout has extra blank lines between lines of text.
Cause
Two line feed commands are
being sent at the end of each
line of text.
The line space setting in your
application software is
incorrect.
What to do
Stop printing and contact your dealer
to have the print head replaced.
What to do
Turn on the auto line feed setting
using the printer's default-setting
mode or the EPSON Remote! utility so
that the printer automatically adds a
line feed code to each carriage return.
See "About Your Printer's Default
Settings" on page 5-4 or "Using the
EPSON Remote! Utility" on page 4-30.
What to do
Turn off the auto line feed setting
using the printer's default-setting
mode or the EPSON Remote! utility.
See "About Your Printer's Default
Settings" on page 5-4 or "Using the
EPSON Remote! Utility" on page 4-30.
Adjust the line space setting in your
application software.
Troubleshooting
7
7-13