Epson LQ-570e User Manual page 64

14. Remove any slack in the paper and adjust the top-of-form
position (the position where the printer will start printing) by
pressing the LF/FF button or using the micro adjust feature.
(To use the micro adjust feature, see "Adjusting the Top-of-
Form Position" on page 2-31.) The printer will start printing
at the current position without advancing the paper.
c
15. Attach the printer cover and close the paper guide cover.
16. You may need to check and change the printer driver settings
as described in Chapter 4. Then send a print job to the printer.
The printer starts printing from the current position without
advancing the paper. The printed pages are fed over the paper
guide toward the back of the printer.
2-20
Printing on Continuous Paper
Caution:
Never use the knob to remove slack in the paper or to
adjust the top-of-form position; this may damage the
printer or cause it to lose the top-of-form position.
Always remove any slack from the paper; otherwise print
quality may be reduced.